 |
 |
|
|
Co2 and gas detector
 |
The B-530G CO©ü module is designed to measure CO2 level in the air. This product is low cost and small enough to be integrated into other equipments easily. It¡¯s main application area is agricultural area such as mushroom house, green house and farms which needs robust and reliable sensor technology.This product provides silicon coating and membrane filter to protect the influence of moisture and spores, small particles in the air.
|
|
|
|
|
|
|
Features
|
Available outputs : AVO, TTL UART, PWM(will be added)
NDIR Type
Re-calibrationfunction(Monthly period/10 min. period)
Size - 65mm x 50mm x 20mm |
| General Performance |
Operating Temperature range=> -10 ~60¡É
Operating Humidity range => 0 ~ 99% RH (Non-condensing)
StorageTemperature => -40 ¡É ~70¡É
|
| Measurement |
Sensing method => NDIR (Non-dispersive Infrared)
| Measurementrange=>
|
0 to 2,000/3,000/5,000/10,000 ppm
|
|
|
0 to 2%, 3%, 5% vol.(Optional)
|
| Accuracy =>
|
0 to 10,000ppm : ±30ppm ±3% of reading
|
|
|
2%, 3%, 5% vol.: ±300ppm ±3% of reading
|
Response Time (90%) => 120 sec
Sampling Interval => 3 sec |
| Electrical |
InputPower=>9~18VDC (±10% Regulation)
Power consumption => Normal. 25mA / Max.130mA
Outputconnector=> 3pin/7pin (Molex 053015) |
| Output |
Digital=> UART/Asynchronous-serial, TTL Level, 38, 400bps
Analog => VDC 0.5 ~ 4.5V (linear output)
PWM(will be added) => 1 Sec Period / 2ms Start / 2ms Stop |
|
|
|
 |
 |
|
